Will Burt INFLEXION HD, Instructions Manual

Page: 74 / 84

I
NSTRUCTIONS FOR
N
IGHT
S
CAN
L
ITE
& I
NFLEXION
HD
5-2 Original Instructions TP-5554501-B
May 2019
5.2 Power Isolating Procedure
All power sources shall be removed from the mast system including mast controls, lighting
power, auxiliary device power before performing any maintenance operation on the mast
system.
To isolate power to the mast system:
1. Operate the mast to the desired position for the maintenance procedure.
2. Active the emergency stop.
3. Disconnect all power sources using lock out tag out procedures. It is recommended that
the vehicle ignition keys be held by the maintenance engineer as an additional
precaution to prohibit unexpected power up.
4. Unplug the mast hand held remote control and keep it with the maintenance engineer
during maintenance to avoid unexpected mast operation.
5.3 Maintenance Equipment
Table 5-1 lists recommended equipment for maintenance.
Table 5-1 Equipment Recommended for Maintenance
Recommended Equipment*
Personal Protective
Safety Glasses Work Gloves Nitrile or Vinyl Gloves
Hearing Protection Hard Hat or Helmet Safety Shoes
Hand Tools
Paint Brushes Torque Wrench Wire Brush
Wrenches
Expendables
Denatured Alcohol or Other
Solvent Glass Cleaner Non-Abrasive Cleaners
(Soap and Water)
Rags (Soft, Clean, and Dry) Touchup Paint
* Note:

Depending on the local, regional, and national standards and codes of practice, and the environment,
additional personal protective equipment may be necessary.

When disposing of any disposables or components, do so according to any applicable local, regional, and
national standards and codes of practice.