Will Burt INFLEXION HD, Instructions Manual

Page: 26 / 84

I
NSTRUCTIONS FOR
N
IGHT
S
CAN
L
ITE
& I
NFLEXION
HD
1-14 Original Instructions TP-5554501-B
May 2019
1.7.1.6 Support Struts
The Support Struts (Figure 1-4) provide lateral stability to the lift mechanism in all operating
positions.
Figure 1-4 Support Struts, Actuator, and Gas Springs
1.7.1.7 Actuator (P/N: 5467502)
The Actuator (Figure 1-4):

Has integrated controls and driver

Includes internal extended and retracted limit switches

Is IP66 rated (dynamic) for dust and water ingress protection

Factory programed soft start and stop in both directions for smooth mechanism
operation at travel extremes

Nesting motion stops when Actuator hard stop is reached or current limiting (10 amp)
into nested bumpers.

Current limit protection for overload conditions

Has a safety nut in retraction direction to prevent Actuator collapse if the Actuator Screw
fails
1.7.1.8 Gas Springs (P/N: 5537701)
The Gas Springs (Figure 1-4) provide fall arrest in the unlikely event of collapse of the Top
Section.
Actuator
Gas
Springs
Support
Struts