Will Burt INFLEXION HD, Instructions Manual

Page: 59 / 84

I
NSTRUCTIONS FOR
N
IGHT
S
CAN
L
ITE
& I
NFLEXION
HD
TP-5554501-B Original Instructions 2-27
May 2019
4. Tighten the cable grip ensuring proper slack inside the control box.
See Section 2.6.2.6 for optional powering with 10-15 VDC power supply.
2.6.2.8 Finalize Electrical Installation
To finalize the electrical installation:
1. Ensure all wiring is complete.
2. Ensure all wires are secure.
3. Ensure the cable grips are firmly tightened.
4. Secure the Control Box Assembly lid and ensure the Control Box Assembly is sealed up.
5. Secure the Junction Box lid and ensure the Junction Box is sealed up.
6. Plug the HHRC cable into the bulkhead connector on the Junction Box (Figure 2-23).
Secure the connector in place so that the cable is secure.
Note: When the HHRC cable is removed from the Junction Box, screw the Dust Cap
onto the bulkhead connector on the Junction Box.
Figure 2-23 Bulkhead Connector
7. The HHRC has an Ø10 mm (Ø 0.394 inch) eyelet to allow the HHRC to be hung on a
customer-provided hook. Install the hook near the Junction Box as appropriate.
Bulkhead
Connector