Will Burt INFLEXION HD, Instructions Manual

Page: 22 / 84

I
NSTRUCTIONS FOR
N
IGHT
S
CAN
L
ITE
& I
NFLEXION
HD
1-10 Original Instructions TP-5554501-B
May 2019
1.7 Major Components
This section describes major components of a Mast System assuming the use of standard
catalog Mast Systems. Characteristics of components customized to meet customer-specific
needs may vary. If necessary, contact The Will-Burt Company for additional details.
Major components of the Night Scan Lite include (Figure 1-1):

Mast Assembly
o
X200 Lights (P/N: 5355406) (Section 1.7.1.1)
o
Remote Controller Positioner (RCP) (P/N: 5532401) (Section 1.7.1.1)
o
RCP Cable (Section 1.7.1.3)
o
Top and Base Sections (Section 1.7.1.4)
o
Knuckle (Section 1.7.1.5)
o
Support Struts (Section 1.7.1.6)
o
Actuator (P/N: 5467502) (Section 1.7.1.7)
o
Gas Springs (P/N: 5537701) (Section 1.7.1.8)
o
Base (Section 1.7.1.9)
o
Saddle (Section 1.7.1.10)
o
Control Box Assembly (P/N: 5551801) (Section 1.7.1.11)
o
Look-Up Light (P/N: 214014) (Section 1.7.1.12)
o
Identification Plate (P/N: 902852) (Section 1.7.1.13)
o
Label Kit (English) (P/N: 5553501) (Section 1.7.1.14)

Junction Box (P/N: 5549701) (Section 1.7.2)

Hand-Held Remote Control (HHRC) (P/N: 5547101) (Section 1.7.3)

Junction Box Cable (P/N: 218103 cut to specified length or P/N: 5563301 for 15 meter
(50 ft.) cable) (Section 1.7.2)

Optional Power Cables (P/N: 218073 cut to specified length or P/N: 5594101 for a 15
meter (50 ft.) cable). This cable is typically supplied by the installer.

Accessory Options (Sold Separately) (Section 1.7.5)
Note the Inflexion HD does not include the RCP or lights referenced in Figure 1-1.