Wildlife Acoustics sm3bat User Manual Download Page 80

Page: 80 / 86

Firmware Release Notes

SM3BAT User Guide

page

BIOACOUSTIC MONITORING SYSTEMS

■

Revised the

AUTO

sample rate calculations. See Program Commands

section of User Guide for new

AUTO

settings.

■

Fixed problem with ZC file timestamps, introduced in 1.1.9, causing

duplicate file names in zero-crossing only mode.

■

Fixed enforcement of maximum trigger length on two-channel recordings.

1.1.9

■

Fix possible GPS synchronization bug in which a recording may be marked

as synchronized when it is not.

■

Correct microphone calibration mode to read dBVrms. This version will

read 1.6dB lower for the 40kHz measurement than prior releases.

■

Implement microphone sensitivity meta data to account for gain.

■

Re-ordered built-in programs such that sunset-to-sunrise comes before

sunrise-to-sunset.

1.1.8

■

Significant improvements and fixes to native crossing recording.

1.1.7

■

Fixed problem causing some flash cards to fail to initialize after power up.

■

Fixed potential problems that could lead to flash card filesystem corruption

under some circumstances.

■

Improved flash card performance to decrease delays in back-to-back

recordings as the number of recordings grows.

1.1.5

■

Fixed a bug that could cause reliability issues.

1.1.4

■

Added a new programming command "FEATURE". This is for advanced

use and is not a required command by the program checker. The first

parameter is a number from 1 to 16 and the second parameter is OFF or

ON. By default, all features are OFF. The only feature implemented initially

is FEATURE#01 which, if ON, disables the LED blinking during

recording. Thus, you can insert into the top of a program "01 FEATURE 01

ON" to disable the LEDs. This capability may be used to add additional

features in the future.

■

Improved performance of back-to-back triggers.

■

Added a means to disable file scrubbing (deleting files with no bat

echolocations detected) in triggered WAV mode so that no files will be

deleted. If DMIN and DMAX are set to OFF then scrubbing is disabled.

■

Changed built-in program DMIN values to 1.5ms from 2.0ms for better

detection of Myotis and other species in cluttered environments.

■

Fixed a bug when "backing up" to start the schedule immediately

with NAP mode or zero crossing enabled, which caused constant "auto-

leveling" activity.

Summary of Contents for sm3bat























































































Search results

Summary of Contents for sm3bat

Reviews:

Related manuals for sm3bat

Brands by name

Popular brands

Wildlife Acoustics sm3bat, User Manual

Search results

Summary of Contents for sm3bat

Reviews:

Related manuals for sm3bat

Brands by name

Popular brands