Wildlife Acoustics sm3bat User Manual Download Page 64

Page: 64 / 86

Utilities

SM3BAT User Guide

page

BIOACOUSTIC MONITORING SYSTEMS

Utilities

9.1

How to Erase and Format SD Memory Cards

This procedure erases and formats all installed memory cards. Use this procedure

prior to all deployments for optimal performance.

WARNING

: This procedure erases all data files on all memory cards in all slots. Verify

that you have imported, saved, or copied any important programs, backed up any

important recordings, and updated any firmware files before running this utility.

At the

Song Meter Main Menu

, select

Utilities

, and press

ENTER/MENU

Select

Format all cards

and press

ENTER/MENU

At the

Confirm: Format All?

prompt, choose one of the following options:

■

Press

►

Right

to select

and cancel this entire procedure. Any

existing data files remain on the memory cards.

■

Press

▼

Down

to select

Yes

and press

ENTER/MENU

to format all

current memory cards in slots A, B, C, and D.

If you select

Yes

, the progress of each card in each slot appears and then the

screen resets to the last selected submenu.

With up to four clean formatted memory cards, you now have the maximum
available space on all cards and are ready to start a program and save
recordings.

9.2

How to Reset Factory Default Settings

This short procedure restores the original device settings set as default values in

the factory when your recorder was first assembled and tested.

At the

Song Meter Main Menu

, select

Utilities

, and press

ENTER/MENU

Select

Set factory default

and then press

ENTER/MENU

The original settings are restored.

CAUTION

: Any custom settings, including solar calculation method, location, and

prefix, are erased.

Summary of Contents for sm3bat























































































Search results

Summary of Contents for sm3bat

Reviews:

Related manuals for sm3bat

Brands by name

Popular brands

Wildlife Acoustics sm3bat, User Manual

Search results

Summary of Contents for sm3bat

Reviews:

Related manuals for sm3bat

Brands by name

Popular brands