Wildlife Acoustics sm3bat User Manual Download Page 18

Page: 18 / 86

SM3BAT Setup

SM3BAT User Guide

page

BIOACOUSTIC MONITORING SYSTEMS

NOTE

: Mounting cabled microphones on ungrounded non-conductive masts

especially in dry and windy conditions, could result in damage to the microphones or

recorder due to electrostatic build up or lightning. Such damage is not covered under

warranty so please check with a professional/licensed electrician or installer of outdoor

antennas, weather instruments or the like for advice suitable to your specific situation.

3.2.1

SMM-U1 Ultrasonic Microphone

The SMM-U1 is a highly sensitive and low noise ultrasonic microphone designed

for recording ultrasound up to 190 kHz. One or two microphones can be attached

via the connector module.

NOTE:

The discontinued SM3-U1 Ultrasonic Microphone is electronically identical to

the SMM-U1, but comes in a larger plastic microphone enclosure. All the information

in this section also applies to the SM3-U1.

The SMM-U1 is a powered microphone

and can be used with up to 100 meters

of cable with no attenuation or

degradation. The microphone has a

differential output, which significantly

reduces noise from electromagnetic

sources.
The omnidirectional SMM-U1 is ideal for

unattended monitoring where the

precise direction of bat activity is not known in advance. See the specifications

chapter for polar plots. For applications requiring directionality, the microphone

can be adapted for directional sensitivity with the available SM3 Horn Attachment.
The SMM-U1 microphone features a hydrophobic membrane transparent to

acoustic or ultrasound signals to prevent unpressurized water from entering the

microphone. In gusty windblown rain,

water may pass the membrane and the

included windscreen should be installed so as to protect the internal ultrasonic

transducer from water damage. We also recommend positioning the microphone

so that they point parallel to the ground, or even slightly downward, so as to

minimize water entry.

3.2.2

How to Connect the SM3-Horn

Attachment

The available SM3 Horn Attachment turns our

SMM-U1 omnidirectional ultrasonic microphone

into a highly directional microphone, while

Summary of Contents for sm3bat























































































Search results

Summary of Contents for sm3bat

Reviews:

Related manuals for sm3bat

Brands by name

Popular brands

Wildlife Acoustics sm3bat, User Manual

Search results

Summary of Contents for sm3bat

Reviews:

Related manuals for sm3bat

Brands by name

Popular brands