Wildlife Acoustics sm3bat User Manual Download Page 21

Page: 21 / 86

SM3BAT User Guide

SM3BAT Setup

page

BIOACOUSTIC MONITORING SYSTEMS

When you turn the power

the following LCD screen appears:

2014-Jan-31 09:00:00
SM3 99999

ULT R1.0.3

A: 2/128 B: 0/128
C: 0/128 D: 0/128

The same information appears when the unit wakes from sleep and starts itself as

programmed. The startup screen shows the following information:

■

The current date in YYYY-MMM-DD format.

■

The current time in HH:MM:SS format.

■

The model number and serial number for the recorder.

■

ULT appears only on SM3BAT models with ultrasonic features.

■

The firmware version. For example, R1.0.3.

■

For each card slot (A, B, C, and D) the memory used as a fraction of the

total capacity in GB.

3.4

How to Install Internal Batteries

Set the power switch down to turn the unit

using internal battery power.

When not in use, set the switch up to conserve battery power. The up position

also enables external power, if connected. When no external power exists,

consider the up position to be

OFF

With normal operation and high quality alkaline batteries, the SM3BAT can record

approximately 18 nights of full spectrum triggered recordings and approximately

20 nights of triggered zero crossing recordings on one channel. The device enters

a very low power state when not recording and uses negligible power between

scheduled recordings.
The recorder can be powered from four standard D size disposable alkaline

batteries or rechargeable NiMH batteries.

NOTE:

NiMH batteries are recommended for cold recording conditions due to the

poor performance of alkaline batteries in freezing conditions.

Purchase four (4) new size D batteries of the same type. Alkaline batteries are
recommended.

NOTE:

Prior to installation, we recommend that you test all batteries with a high-

quality pulse load battery tester such as the ZTS MINI-MBT.

Position your thumb and index finger into opposing bevels of one of the twist-
off battery bay covers.

Rotate the cover up to 90 degrees



counterclockwise to remove it.

The spring-loaded cover opens and the old batteries emerge.

Summary of Contents for sm3bat























































































Search results

Summary of Contents for sm3bat

Reviews:

Related manuals for sm3bat

Brands by name

Popular brands

Wildlife Acoustics sm3bat, User Manual

Search results

Summary of Contents for sm3bat

Reviews:

Related manuals for sm3bat

Brands by name

Popular brands