WhisperGen PPS16-12MD, User Manual

Page: 27 / 84

Operation
Stopping the WhisperGen
TM
19
Emergency Stopping
The WhisperGen
TM
must complete a cool down sequence. There
is no way to immediately stop the engine.
In case of fire, use a carbon dioxide or dry powder extinguisher -
do not use water.
To cancel auto re-start, push the stop button on the control
panel.
To stop the WhisperGen
TM
in an emergency:
1. Turn off the fuel valve in front of the WhisperGen
TM
.
FUEL OFF
ON
Personal Power Station
The flame in the WhisperGen
TM
burner will be extinguished within a few
seconds. The fuel cut-off will be registered as a fault and the WhisperGen
TM
will stop. The fault will need to be cleared (see section entitled Clearing
Faults and Warnings) before the WhisperGen
TM
can be started again.
The WhisperGen
TM
will attempt to re-start (if auto restart is enabled). If the
fuel valve remains off, the attempt will fail. It is recommended that once the
fuel valve has been turned off and the stop button on the control panel
activated, this will cancel all auto-restarts.