Maintenance
Introduction
37
Maintenance
Introduction
This section outlines maintenance procedures for your WhisperGen
TM
. It
will show you how to:
Develop a basic maintenance routine for the WhisperGen
TM
;
Maintain the fuel and coolant systems;
Check the battery bank connections; and
Replace the glow plug, fuses, FID, oxygen sensor, and evaporator.
You should read and understand all safety precautions before
operating or maintaining your WhisperGen
TM
. Contact your authorised
WhisperGen
TM
distributor or dealer to order spare parts.
Before carrying out maintenance, the Enable Starts option in the
Installation Menu should be set to 0 to prevent unintentional starts of the
WhisperGen
TM
. Reset to either 1 or 2 (depending on the user setting
requirement) after maintenance has been completed. For information on
how to edit the settings, refer to the section entitled Displaying System
Information - Editing Parameter Settings.
If service checks are not performed by an authorised
WhisperGen
TM
service agent every 12 months or 500 hours of operating
time from the date of commissioning, the warranty on the WhisperGen
TM
will be void.
When performing any maintenance work on the WhisperGen
TM
,
refer to the applicable sections when removing or replacing parts and
stopping or starting the WhisperGen
TM
.
Summary of Contents for PPS16-12MD
Page 1: ...user s manual Part Number WP 5012 001 01 ...
Page 2: ......
Page 4: ......
Page 8: ......