WhisperGen PPS16-12MD User Manual Download Page 28

Page: 28 / 84

Stopping the WhisperGen

Operation

Setting the Maximum Run Time

If the WhisperGen

is started manually or from a remote switch, you can

limit the operating duration of the system by setting a maximum operating
time.

To set the maximum operating time of the WhisperGen

1. Access the default display on the control panel by pressing

Left Arrow

repeatedly.

Battery Watts

2. Press

Right Arrow

to display the first item on the main menu, the

User

Menu.

User Menu

3. Press

Right Arrow

to display the first item on the User Menu.

Heat Manage

4. Press

Down Arrow

to scroll down to

Max Run Hours

Max Run Hours

5. Press

Right Arrow

to begin editing the maximum operating time of the

WhisperGen

6. Press

Up Arrow

Down Arrow

to select the maximum number of

operating hours for the WhisperGen

. If

(hours) is selected, the

WhisperGen

will run continuously until the battery bank is fully

charged.

Max Run Hours 21

Optional:

press

Left Arrow

repeatedly to return to the default display.

The default display will re-appear automatically after
a few minutes of inactivity on the control panel.

If the

Max Run Hours

setting is less than

, the WhisperGen

will

automatically stop when the

Max Run Hours

set value is reached, even if

the battery bank is not yet fully charged. If the

Max Run Hours

setting is left

at its default value of

, no maximum operating time condition is imposed:

the WhisperGen

will run continuously until the battery bank is fully

charged.

Note that the

Max Run Hours

setting applies only if the WhisperGen

started manually or from a remote switch. It does not apply if the
WhisperGen

automatically starts by itself as a result of the auto-charge or

heat manage function.

For more information on battery bank auto-charging, see section Managing
the Battery Bank in the User Manual. For a summary on operating options,
see the Quick Reference in the User Manual.

Summary of Contents for PPS16-12MD





















































































Search results

Summary of Contents for PPS16-12MD

Reviews:

Related manuals for PPS16-12MD

Brands by name

Popular brands

WhisperGen PPS16-12MD, User Manual

Search results

Summary of Contents for PPS16-12MD

Reviews:

Related manuals for PPS16-12MD

Brands by name

Popular brands