WhisperGen PPS16-12MD, User Manual

Page: 44 / 84

Editing Parameter Settings
Operation
36
Editing Parameter Settings
Information displayed on the control panel is structured as shown in section
entitled Quick Reference. The settings of all the parameters under the
User
Menu and Installation Menu can be edited. The Warning Code Edit to
clear parameter under the Fault/Warning Menu can also be edited. All
other parameter settings can be displayed but not edited.
To edit the setting of a parameter:
1. Display the parameter on the control panel – see section entitled
Displaying System Information - Displaying Information.
For example, if you wish to edit the battery bank auto-charging setting,
then display
Auto-charge on the control panel by pressing Right
Arrow twice followed by Down Arrow twice from the default display.
Auto-charge
2. Press Right Arrow to begin editing the setting of the parameter. The
existing setting of the parameter will be displayed. In the above
example, either
ON or OFF will be displayed, depending on the existing
setting of Auto-charge.
Auto-charge OFF
3. Press Up Arrow or Down Arrow to edit the setting. In the above
example, if the existing setting is OFF and you wish to turn on auto-
charging, then press Up Arrow to change the setting to ON .
Auto-charge ON
ƒ
Optional: press Left Arrow repeatedly to return to the default display.
You can also let the default display re-appear automatically by allowing
a few minutes of inactivity on the control panel.
Battery Watts