COMPONENT ACCESS
Vesta Gas and Electric Slide-In Range
n
3-13
Removing the Bake Element
1. This should be easier if the oven door is removed.
2. Remove two mounting screws from the oven bo om/ oor
at the back corners of the oven.
. Remove oven oor
4. Locate and remove Bake element mounting screws
. Pull bake element toward front of oven until electrical
connections are visible through back wall of oven
. Remove electrical connections (do not let wires slip out
rear wall)
7. Pull element out
e o ing the con ection an otor
and element assembly
1. This should be easier if the oven door is removed.
2. Remove mounting screws from the convection ba e
cover on the back wall of the oven and remove the cover.
. Pull the convection fan motor mounting bracket into the
oven.
4. Remove the electrical connections to the fan motor.
5. Remove the fan motor and fan blade assembly from the
oven.
Figure 39
Figure 40
Figure 41
Figure 42
Figure 43