COMPONENT ACCESS
Vesta Gas and Electric Slide-In Range
n
3-3
. Remove 2 screw from each of the cooktop mounting
brackets (2).
. From behind the range, remove 1 screw from each of
the cooktop mounting brackets (underside 2).
. Lift the cooktop from the back and remove
Figure 5
Figure 6
Figure 7
Removing the User Interface and
Display Assembly
1. Remove the control panel (see “Removing
the Control Panel section).
2. Turn the control panel over to expose
the display assembly.
. Remove the electrical connections to
the display assembly and user interface.
4. Remove the 4 mounting screws securing the display
assembly.
. Remove the mounting screws securing the user
interface.
6. Remove the user interface.
Removing the MRC Control Board
1. Remove the control panel
(see Removing the Control Panel section).
2. Remove the cooktop (see “Removing the
Cooktop section).
. Locate the MRC board in the center of the console.
4. Remove all wire harness connectors from the board.
Locate the control board mounting bracket
mounting screws (2) and remove.
. Lift up and pull the MRC board assembly out.
Figure 8
Figure 9
