Whirlpool Gold GU2800XTV, Manual

Page: 31 / 75

2-21
Connect to Drain
Place towel under drain hose to catch any water
in drainhose. Place the small green drain hose
clamp onto the small end of the drain hose. Push
the new drain hose into the black drain hose
connector up to the drain hose stop.
Using pliers, squeeze open the small green
drain hose clamp and slide onto connector
between stops.
If needed, see website for animated representation
of this step.
Visit www.whirlpool.com/drain under FAQ tab.
Make Direct Wire Electrical
Connection
NOTE: If the power supply cord was connected
earlier proceed to Secure Dishwasher inCabi-
net Opening section.
Option B, Direct Wire:
Route cable so that it does not touch dishwasher
motor or lower part of dishwasher tub. Pull cable
through cable clamp in terminal box.
Select UL listed or CSA approved twist-on
wire connectors (not included) rated to connect
your household wiring to 16-gauge dishwasher
wiring.
1
Connect drain hose
Drain hose
Green clamp
Black drain hose
connector
Stop
Stop
Drain hose stop
2
Slide clamp onto connector
Drain hose
Green clamp
Black drain hose
connector
Stop
Stop
Drain hose stop
3
Hose clamp final position
Drain hose
Green clamp
Black drain hose
connector
Stop
Stop
Drain hose stop
Direct Wire—Route cable
into terminal box
1