Whirlpool Gold GU2800XTV, Manual

Page: 20 / 75

2-10
Route water supply line
3
Slowly route water supply line through hole
in cabinet. (If using copper tubing, it will bend
and kink easily, so be gentle.) It should be far
enough into the cabinet opening to connect it
to the dishwasher inlet on the front left side of
the dishwasher.
Flush water supply line
4
Slowly turn water shutoff valve to “ON” position.
Flush water into a shallow pan until clear to get
rid of particles that could clog the inlet valve.
Turn shutoff valve to “OFF” position.
Install Drain Hose
IMPORTANT: Always use a new drain hose.
Check local codes to determine if an air gap
is required.
Drill hole
1
1-1/2”
(3.8 cm)
If needed, drill a 1-1/2” (3.8 cm) diameter hole
in cabinet wall or side of the opening closest
to the sink.
Drain hose
Route drain hose
2
Route drain hose as shown through hole in
cabinet to the front center of opening where
drain connection will be made. Tape drain hose
to the floor in area shown. This will prevent it
from moving when dishwasher is moved into
cabinet opening.