2-18
4
Open and close door
With another person holding the dishwasher to
preventit from tipping, open and close the door
a few times. If the door closes or falls open un-
der its own weight, the door tension will need
to be adjusted.
Closes too quickly—
Decrease spring tension
5
If the door closes too quickly, decrease the
spring tension by moving the spring end toward
the front of the dishwasher.
NOTE:
Springs should be in the same notches
on left and right sides.
Door falls open—
Increase spring tension
6
If the door falls open, increase the spring ten-
sion by moving the spring end toward the back
of the dishwasher.
NOTE:
Springs should be in the same notches
on left and right sides.
Move dishwasher into
cabinet opening
7
Insulation
blanket
Insulation
blanket
IMPORTANT:
If wheels were removed, protect
the floor when moving the dishwasher. Slowly
move dishwasher completely into cabinet
opening. Do not kink or pinch water line, drain
hose, power supply cord or direct wire between
dishwasher and cabinet. Remove cardboard
from under dishwasher.
NOTE:
It is all right if dishwasher fits tightly into
cabinet opening. Do not remove insulation blan-
ket – the blanket reduces the sound level.
NOTE:
If using power cord, make sure to route
end through hole in cutout before sliding into
cabinet opening.
Summary of Contents for Gold GU2800XTV
