Whirlpool Gold GU2800XTV, Manual

Page: 12 / 75

2-2
TOOLS NEEDED
Pliers •
Phillips screwdriver •
Flat-blade screwdriver •
5/16" and 1/4" nut drivers or hex sockets •
Measuring tape or ruler •
UL listed or CSA approved twist-on wire •
connectors *
10" adjustable wrench that opens to 1-1.8”
•
(2.9 cm)
Utility knife
•
Small Level •
5/8” open-end wrench •
PARTS NEEDED
PARTS SUPPLIED
Gather the required tools and parts before start-
ing installation. Read and follow the instructions
provided with any tools listed here.
*Must be the proper size to connect your house-
hold wiring to 16-gauge wiring in dishwasher.
Other useful items you may need:
Flashlight Bath towel
Wood block
Shallow pan
Make sure all these parts are included in the literature package.
Drain hose
2 - Drain hose clamps
(1 large and 1 small)
2 - #10 x 1/2”
Phillips-head
screws
Green
Silver
Make sure all these parts are included in the
literature package.
Other parts you may also need:
Masking or
duct tape
1-1/2”–2”
(38.1– 5.0 cm)
Screw-type
clamps (3 max)
Side mounting kit
for solid surface
countertops
(Part No. 8212560)
NOTE: Parts available for purchase in plumb-
ing supply stores. Check local codes. Check
existing electrical supply. See “Electrical Re-
quirements” section. It is recommended that
electrical connections be made by a licensed
electrical installer.
® Teflon is a registered trademark of E.I. Du Pont de
Nemours and Company.
In addition, for first time installations
Tools needed:
Wire stripper
Small
tubing cutter
Electric drill
with 1/2", 3/4”
and 1-1/2" hole
saw bits
Parts needed:
Copper tubing (3/8”
O.D. suggested) or
flexible braided
water supply line
For Direct Wire:
use UL listed or
CSA approved
conduit
connector to
fit 7/8” (2.2 cm)
hole
See “Electrical Requirements” section
For Power Supply
Cord: use UL
listed power
supply cord kit
marked for use
with dishwasher