Whirlpool Gold GU2800XTV Manual Download Page 2

Page: 2 / 75

- ii -

WHIRLPOOL CORPORATION assumes no responsibility for any repairs

made on our products by anyone other than In-Home Service Professionals.

FORWARD

This Whirlpool Job Aid, “2008 Undercounter Dishwasher” (Part No. 8178741), provides the In-

Home Service Professional with information on the installation, operation, and service of the

2008 Undercounter Dishwasher. For specific information on the model being serviced, refer to

the “Use and Care Guide,” or “Tech Sheet” provided with the washer.
The Wiring Diagram used in this Job Aid is typical and should be used for training purposes only.

Always use the Wiring Diagram supplied with the product when servicing the unit.

GOALS AND OBJECTIVES

The goal of this Job Aid is to provide information that will enable the In-Home Service Profes-

sional to properly diagnose malfunctions and repair the 2008 Undercounter Dishwasher. The

objectives of this Job Aid are to:

Understand and follow proper safety precautions.

•

Successfully troubleshoot and diagnose malfunctions.

•

Successfully perform necessary repairs.

•

Successfully return the dishwasher to its proper operational status.

•

2008, Whirlpool Corporation, Benton Harbor, MI 49022

Summary of Contents for Gold GU2800XTV












































































Search results

Summary of Contents for Gold GU2800XTV

Reviews:

Related manuals for Gold GU2800XTV

Brands by name

Popular brands

Whirlpool Gold GU2800XTV, Manual

Search results

Summary of Contents for Gold GU2800XTV

Reviews:

Related manuals for Gold GU2800XTV

Brands by name

Popular brands