WHILL F User Manual Download

Page: 48 / 120

WHILL Model F User Manual

3. Assembly and adjustment

3.3. Adjustment procedures

The following device adjustments can be made to meet the user's seating needs.
•

Height of arm rest:“3.3.1. Adjusting the height of the arm rest” on page 48

•

Space between arm rests:“3.3.2. Changing the space between arm rests” on page 50

•

Switching the left and right sides of the controller: “3.3.3. Switching the position of the controller” on page 53

WARNING

Perform adjustment

s on a flat and

level surface with the battery removed and brakes locked.

Otherwise, there is a risk of accident.

Do not touch the metal terminals of the connectors, allow them to become wet, or bring any

metal or other foreign objects close to them. Ensure that there are no foreign objects when
assembling.

Otherwise, there is a risk of injury and of damage to the device or its parts.

CAUTION

When adjusting the device, grab only the handle and part as described in this manual, and do

not hold the device by any other areas.

There is a risk of hand injury if it gets caught in the device.

Pay attention to the following and perform adjustment in order to ensure safe use.

Otherwise, there is a risk of accident.
•  Adjust the seating of the device to fit the user's body before use.
•  Be careful to re-tighten all of the adjusting bolts after adjustments.
•  Do not make adjustments while on the device.

When installing and removing arm rests and other parts on the device, take care not to apply

unnecessary force.

There is a risk of injury to the user and damage to parts.

When installing the arm rests or moving the arms up or down during height adjustment, be

careful that y

our finge

rs do not become caught.

There is a risk of injury.

Do not throw, step on, drop the controller, or immerse it in water.

There is a risk that the controller may be damaged from strong impact, rendering the device
inoperable.

Do not press forcefully, scratch or touch the controller display with dirty hands.

There is a risk that the display may become damaged or illegible.

Do not disassemble the controller.

Doing so may cause the controller to malfunction.

Do not shake the controller.

Doing so may cause the controller to malfunction.

Summary of Contents for F

























































































































Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands

WHILL F, User Manual

Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands