manualshive.com logo in svg

WHILL F, User Manual

Share
Download
WHILL F User Manual Download Page 25

24

WHILL Model F User Manual

3

3.1.1. 

Before assembling the device

The following device adjustments can be made to meet the user's seating needs.
•  Space between arm rests
•  Height of arm rest
•  Position of controller
Make adjustments in the order described here.

Unfold the device.

3.2.1.  Unfolding the device

Install the color plate

3.2.2.  Installing the color plate

Install the arm rests.

3.2.3.  About installing the arm rests 
3.2.4.  Installing the arm rests 
 

Before installing, select the space between arm rests and the position of the controller.

Space between arm rests

Standard

Wide

Position of 
controller

Right side

“Installation pattern 1” 

on page 31

“Installation pattern 2” 

on page 32

Left side

“Installation pattern 3” 

on page 37

“Installation pattern 4” 

on page 42

Adjust the height of the arm rests

3.2.5.  Adjusting the height of the arm rest

Connect the controller cable.

3.2.6.  Connecting the cable

Install the seat cushion onto the seat assembly.

3.2.7.  Installing the seat cushion onto the seat

Install the battery.

3.2.8.  Installing the battery

Summary of Contents for F

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands