WHILL F User Manual Download

Page: 53 / 120

WHILL Model F User Manual

Install the controller to the arm rest on the opposite
side. Likewise, install the hand r est removed to the
arm rest on the opposite side.

For the installation procedure, refer to Steps 6 to 10 in
“3.2.4. Installing the arm rests” “■Installation pattern
2” (on page 32).

Install each of the arm rests on the device.

For the installation procedure, refer to Steps 11 to 13 in
“3.2.4. Installing the arm rests” “■Installation pattern
2” (on page 32).

10.

Tighten the arm rest adjustment screw

, and fix the arm

rest in place.

11.

Connect the cable.

For details on how to connect the cable, refer to “3.2.6.
Connecting the cable” on page 44.

12.

Install the battery.

For the installation procedure, refer to “3.2.8. Installing
the battery” on page 46.

13.

Turn on the power and check that the device moves
forward, backward, left, and right without problems.

If an error appears on the display, check “10.
Troubleshooting” on page 108. If the issue persists,
contact your dealer or customer support.

Summary of Contents for F

























































































































Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands

WHILL F, User Manual

Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands