WHILL F Page 85 User Manual Download | Manualshive

Page: 85 / 120

background image

84

WHILL Model F User Manual

5

5.6. Releasing the brakes

To move the device manually, push down the brake release levers located below the seat assembly.

WARNING

Release the brakes onl

y when on a flat sur

face and in emergencies after turning off the power.

After moving the device manually with the brakes released, raise the brake release levers and
lock the brakes.

There is a risk accidents may occur because the device will move freely when the brakes are
released.

Do not manually go up and down slopes with the brakes released.

There is a risk accidents may occur because the brakes do not work.

CAUTION

When moving the device after releasing the brakes, push it slowly by hand while paying

attention to the condition of the road.

When the brakes are released, the device will move freely. Pushing it forcefully may cause it to
move in an unexpected direction. If the device is pushed at speeds of 5 mph (8 km/h) or higher,
there is a risk of the battery malfunction because a load is applied to the battery.

When operating the brake release lever, be careful not to catch or crush y

our finger or hand.

There is a risk of injury.

Do not operate the brake release levers with your feet.

The brake release levers may become deformed, broken, and unusable.

5.6.1.

Release procedure

1.

Turn off the device power.

2.

Push down both brake release levers below the seat
assembly (two on the right and left side).

The brakes are released. To re-engage the brakes, raise
both brake release levers.

Brake release

lever

«
...
83
84
85
86
87
...
»

Summary of Contents for F

























































































































Reviews:

No comments

Related manuals for F

Brand: Handicare Pages: 44

Brand: Handicare Pages: 32

Drive Rollator Cristallo2

Brand: DeVilbiss Healthcare Pages: 16

Brand: Everest & Jennings Pages: 32

Brand: CareCo Pages: 2

Brand: CareCo Pages: 16

Brand: Quantum Rehab Pages: 28

Brand: Quantum Rehab Pages: 53

Brand: Power Plus Mobility Pages: 11

Quantum Q6 Edge 3MP

Brand: Pride Mobility Pages: 43

Brand: Karma Pages: 48

Brand: Paravan Pages: 156

Brand: Vela Pages: 40

Brand: Handicare Pages: 50

Brand: Jay Pages: 11

Brand: obbo med Pages: 3

JIMMIE - UL8WPB

Brand: Shoprider Pages: 2

Brand: Shoprider Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands