WHILL F User Manual Download

Page: 98 / 120

WHILL Model F User Manual

7. Storage and transport methods

7.2.3.

Removing the arm rest with controller for transportation

To remove the arm rest with controller from the device for transportation, follow the procedure below.

CAUTION

When bringing the arm rest with controller ont

o an airplane, fi

rst check with the aircraft

company you are using for permission to bring it on board.

Do not drop the arm rest with controller after removing it or strongly pull its cable.

There is a risk of the controller being damaged.

After removing the arm rest with controller, put it in a case or bag. Do not carry the arm rest

with controller as it is. Also, ensure that the cable is not caught.

There is a risk of the controller being damaged.

The length and main material of the arm rest with controller are as follows. Refer to this

information when checking permission to bring the arm rest on board an airplane.

•  Length: 39.6 cm
•  Weight: 950 g
•  Main material: Aluminum

Remove the battery.

For the removal procedure, refer to “4.1.1. Removing
the battery” on page 59.

Remove the seat cushion from the seat.

Seat cushion

Summary of Contents for F

























































































































Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands

WHILL F, User Manual

Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands