WHILL F Page 23 User Manual Download

Page: 23 / 120

WHILL Model F User Manual

Assembly and adjustment

This section explains how to assemble the device, and how to adjust each component.
Assemble the device in the order described in this user manual.

WARNING

Take care not to drop the battery and charger when removing them from the box, or installing

them on the device.

Otherwise, there is a risk of accidents such as injury or fire.

Perform adjus

tment on a flat and

level surface with the battery removed and brakes locked.

There is a risk that the device may start moving, causing an accident.

Always place all parts back to their original positions after adjustment.

There is a risk of damage to the device if there is a missing component.

Assemble and adjust the device in the order described in this user manual. Do not perform any

adjustment, repair

, or modifi

cation that is not listed in this manual.

There is a risk of injury and product safety risk due to damage to the device or its parts.
Performing repair or modification which is not listed in this manual will invalidate the warranty.

Do not perform assembly in a wet environment or if the device is wet.

There is a risk the device may become damaged and accidents may occur.

When removing the device from the bo

x, firm

ly hold it and take care not to drop it or let it tip

over.

There is a risk of injury to the user and damage to the device as a result of falling.

If you cannot perform assembly and adjustment by yourself, contact your dealer or customer support.

3.1. Names of parts

The following parts are packaged with this device.

• WHILL Model F (device)

Summary of Contents for F

























































































































Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands

WHILL F, User Manual

Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands