WHILL F Page 95 User Manual Download

Page: 95 / 120

WHILL Model F User Manual

7.2.1.

Transporting the device with the device in a folded state

This section explains how to transport the device with the device in a folded state.

CAUTION

Fully check the surroundings and road conditions before transporting the device.

There is a risk of collision with the surroundings and the device tipping over.

Do not change the direction of the device while the wheel at the bottom of the foot rest is still in

contact with the ground.

There is a risk of excessive force being applied to the stand wheel and the stand wheel being
damaged.

Do not allow the device to tip over.

There is a risk of damage to the device.

Roll the device by holding onto the arm rests.

Check that the arm rest adjustment screws are
firmly tightened.

Arm rest

When changing the direction of the device, raise up the
stand wheel at the bottom of the foot rest, and tilt the
device so that only the anti-tip rollers are in contact
with the ground.

Anti-tip roller

Summary of Contents for F

























































































































Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands

WHILL F, User Manual

Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands