WHILL F User Manual Download

Page: 73 / 120

WHILL Model F User Manual

5.2.1.

Accessing the seat from the front

Ensure that the power is turned off.

Raise the foot rest by lifting the end of the foot rest
with your hand.

When getting in the device, do not get on or stand on
the foot rest. The device may tip over, and there is a
risk of injury.

Foot rest

Sit in the seat.

• Do not let your hands touch the controller.
• As the back support can be folded forward, do not

pull it toward you or apply force to it in the forward
direction. There is a risk that the back support
may tilt forward, causing an accident.

• Before using the device, be sure to check that the

device has been properly unlocked.

• Take care not to catch or bump your feet against

the foot rest frame.

• Do not get on or place your weight on the foot rest

frame. The device may tilt forwards and tip over,
and there is a risk of accidents.

Summary of Contents for F

























































































































Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands

WHILL F, User Manual

Search results

Summary of Contents for F

Reviews:

Related manuals for F

Brands by name

Popular brands