Quick Start - page 43
LXE / Feb 2018
Q U I C K S T A R T G U I D E
To confirm the IP address has changed, click the Refresh Button. (or Clear, then Ping
on older versions).
Note that now the IP has changed, the Module Panels are still associated with the old
Surface Host IP.
To correct this condition, select the Module Panel Hosts from the List above (Highlight
all that are paired with this surface). Use the Shift or CTRL key and click the appropriate
module panel hosts.
Once you have selected all of the Module
Panels, in the Set all Selected Devices panel
below, drop the Host Data selector down and
scroll to and select the new Surface Host IP
Address.
Click the SET Button.
Note that the Surface will change from
trying to connect to the old IP to Connected
to the new IP, but the Surface Setup GUI may
still show Connecting/Disconnected.
At this point, we should restart the Module
Panels, by clicking Reboot Selected Devices.
You will receive a pop up asking if you are sure.
Click Yes and the Module Panels will restart.
