Quick Start - page 42
LXE / Feb 2018
Q U I C K S T A R T G U I D E
Click the Ping (or Refresh) Button to get a list of WheatNet-IP devices on the network.
Note that if you are on your main WheatNet-IP network you might get a long list of blades,
surfaces, and other WheatNet-IP devices, in addition to the LXE Surface Host and Panel
Hosts. If your network is isolated while doing this setup, then you will only see the LXE
Devices in the Locator results. In our example below we are using the main WheatNet-IP
network as you can see other devices in the list.
Find in the list and click on the LXE Surface Host with the IP address of 192.168.87.90.
Notice in the Bottom half of the screen is now changed to allow edits to the Surface
Host that is selected above.
Click in the Address Field and change the IP address of the surface to suit your
installation.
Then click Apply, then Reboot. You will be prompted to confirm you want to restart
the Surface Host to apply the change of IP address.
