B E L 2 7 0 F
U L L Y
A
U T O M A T I C
H
O T
M
E L T
G
L U E
C
A S E
S
E A L E R
2
65-07-6
3/6/2007
SAFETY CAUTION!
Make sure the machine is disconnected from the air and power supplies before
undertaking any maintenance or service procedures.
Only one person at a time should adjust the machine.
Only qualified personnel must operate machine.
Be aware of the following machine characteristics:
- When the machine is connected to an air supply and first turned on, the
Snap Folders
will cycle once
and the compression press may cycle once. Be sure all personnel are clear of the machine when
starting.
- If the machine is running, activating the left hand limit switch at the infeed entrance will cause the
Snap Folders
to cycle and the right hand limit switch at the entrance will cause the indexing stop
gate to operate.
- When the machine is running, activation of the limit switches mounted on the side belt conveyor
cover or the bottom roller conveyor at the center of the machine will cause hot glue to be dispensed
and can cause severe burns.
NEVER REACH INTO THE MACHINE WHILE IT IS RUNNING
For additional copies of this manual, parts, service or other information contact:
Phone (604) 270-0811 • Fax (604) 270-7897
E-mail: [email protected]
