Westport WEST ADR 80/02 User Manual Download Page 54

Page: 54 / 91

5.6. REAL-TIME GRAPH

5.6.2

Navigating the Real-time Graph

Once the real-time graph is started, the

Real-time Graph

window will open

(Fig. 5.18).

Figure 5.18: Navigating real-time graph

Menu Bar

This menu bar allows for the setup and navigation of the

graphs, see

Section 5.6.3 - Real-time Graph Menu Functions

Graph Area

Data curves are plotted in this region during logging.

Legend

This bar indicates which parameters are being displayed in the

graphs and their respective colors.

Y-Axis

A y-axis is shown for each parameter plotted. The y-axes can be

associated to their respective parameters by color, as defined by the
graph legend.

X-Axis

The x-axis denotes the time-scale of the graph.

WEST User Manual

Summary of Contents for WEST ADR 80/02




























































































Search results

Summary of Contents for WEST ADR 80/02

Reviews:

Related manuals for WEST ADR 80/02

Brands by name

Popular brands

Westport WEST ADR 80/02, User Manual

Search results

Summary of Contents for WEST ADR 80/02

Reviews:

Related manuals for WEST ADR 80/02

Brands by name

Popular brands