Westport WEST ADR 80/02, User Manual

Page: 80 / 91

9.1. FAULT CODES
9.1.5 Clearing Fault Codes
To clear fault codes, click the Clear Inactive Faults button (Fig. 9.8).
Figure 9.8: Clear inactive faults
NOTE: Pressing Clear Inactive Faults button will clear codes in BOTH
controllers, even if you are only connected to the primary!
In the confirmation box that appears, click Yes to clear fault codes in BOTH
controllers (Fig. 9.9).
Figure 9.9: Clear fault confirmation
Fault codes can also be cleared using the Clear Inactive Fault Code
option under the Service menu (Fig. 9.10). In the confirmation box that
appears, click Yes to clear fault codes in BOTH controllers.
Figure 9.10: Clear fault code menu
WEST User Manual 68