
5.9. EDIT REAL-TIME VIEWS
b. To open an existing view, click the
Open
button (Fig. 5.34).
In
the window that appears, select the XRV file to be
opened
.
The
parameters contained in the XRV will open in the
Real-time Data
Editor
Window (Fig. 5.35).
Figure 5.35: Real-time data editor
c. To remove a parameter, select it and press the
Delete
key.
d. To add a parameter, click the
+Add
button (Fig. 5.35) in the
Real-
time Data Editor
window.
NOTE:
The parameters available for selection are from the controller
connected as the
primary
controller.
e. Find the desired parameters in the selection window that appears (Fig. 5.36),
either by scrolling through the list or using the
Current Filter
box to
narrow down the search criteria. Select the parameter(s) by
checking
the box
next to it. Click the
+Add
button to add the parameters to
the view.
f. Once all the desired parameters are selected, close the
Configuration
Parameter Window
and save the changed view by clicking the
Save
button.
g. In the dialogue box that appears (Fig. 5.37), enter a new XRV name
that is different from the original one. Select a desired location, then
click the
Save
button.
WEST User Manual
55
Summary of Contents for WEST ADR 80/02
