38
12 Attachments
The attachments are factory-equipped with a mounting bracket. The attach-
ment is attached to the illustrated holder by approaching the CM2 PRO in a
straight line. Once the attachment is correctly mounted in the bracket, the
attachment is firmly connected to the machine by simply swinging the lock
over. The two parallel locking bolts slide out. Depending on the attachment
and application, further connections such as hydraulic lines or power supply
must be made. The complete machine can then be used.
12.1.1 Regular lubrication of the equipment lock
The mobility of the equipment lock must be checked at regular intervals.
If the function is impaired by dirt and/or stiffness, the equipment lock
must be cleaned and the moving parts must be lubricated with grease.
It is recommended to use a brush when applying grease.
12.1.2 Floating position
The floating position of the hydraulic system is made
possible by pushing the upper control lever away into
the locking position.
(Fig. 18 - Equipment lock)
Locked view
Locked
Lubricate
gaps
NOTICE
NOTICE
