34
11 Operation
Accelerator
The CM2 PRO has an accelerator pedal on the
right side of the vehicle:
By pressing the pedal forward, the vehicle
moves forward. The speed is regulated depen-
ding on the pressure intensity on the pedal.
The machine is reversed by pressing the rear
of the pedal with the foot. The speed is regu-
lated depending on the pressure intensity on
the pedal.
Steering
The CM2 PRO has a very tight turning radius due to
the wheel geometry. The chain-guided steering is
translated via the steering wheel to the rear
wheel. This allows turning in narrow passages and
spaces on the spot.
Regulating engine speed
During operation, set the throttle position
according to the desired engine speed.
GXV
B
&
S
high
pulled out
speed
low
pulled in
speed
(Fig. 13 - Accelerator pedal)
(Fig. 14 - Steering)
(Fig. 15 - Speed control)
1
2
1
2
