37
12 Attachments
12.1 Attachment of the equipment
The hoist connects the machine and the attachment making it into one
working unit. The position and lifting of the attachment are hydrauli-
cally controlled.
In addition, the weight and load of the attachment exert pressure on
the front axle to improve traction.
The selected attachment is to be attached or coupled onto the CM2 PRO.
If ballast weights are required, they must be connected
to the CM2 PRO at the designated attachment points
according to the instructions.
When attaching or coupling the attachments particular caution is
necessary.
Always lower the attachments to the ground, turn off the engine, and
release the system pressure (by operating the control levers with the engine
off) before attaching or detaching the attachments‘ hoses. The machine has
a 350 mm lift height.
NOTICE
(Fig. 17 - Fitting attachments)
Hoist lowered
Hoist lifted
