33
11 Operation
11.5 Functional overview
Seat adjustment
The lever for seat adjustment (to optimally position
yourself on the machine) is located on the left
hand side in the direction of travel under the seat.
Briefly pulling the locking bar outwards
unlocks the track. Positioning takes place via
body movement.
Parking brake
In order to prevent the machine from moving in
idle state, the parking brake can be activated
for safety reasons.
To operate the handbrake, pull the brake lever
on the steering column upwards and place it in
the notch.
Gearbox release
If the CM2 PRO is to be moved manually, the
gearbox release must be used.
To activate the gearbox release, remove the
rubber flap and turn the lever shown.
Only carry out the gearbox release with the engine
switched off.
To activate the release
- Press the lever at the front tip
(approx. 2 - 5 cm) downwards to get over the
nut.
- Pull lever forward and release above pos.
- Gearbox release is activated.
To deactivate the release
- Press lever down and push it backwards.
- Then release the lever above pos. .
- Gearbox release is deactivated.
(Abb. 10 - Sitzverstellung)
(Fig. 11 - Parking brake)
(Fig. 12 - Gearbox release)
2
3
4
1
2
3
4
1
4
1
3
Release position
Driving position
Guide slot incl.
compression spring
to secure position
CAUTION
!
