32
11 Operation
11.3 Running-in period
The first 50 hours of operation have a major impact on the performance
and service life of the CM2 PRO.
The following aspects should be taken into account for a long service life
of the machine:
P
The engine can be run from start to full speed, but heavy loads
should be avoided.
P
Stalling the engine is to be avoided!
P
Check fluid levels (oil, ...) frequently during running-in and check for
leaks.
P
Repeatedly inspect nuts, bolts and screws etc. and re-tighten if
necessary. Pay particular attention to wheel bolts!
P
Use only clean fuel.
Proper maintenance is of crucial importance for the
operational safety of the vehicle.
11.4 Short engine running time
The oil level must be checked regularly when running the engine for only
short periods of time (less than 15 minutes)! When run for short periods,
water and fuel can quickly get into the oil and thus the lubricating effect
of the oil is largely lost. This has the consequence that parts wear out
faster and thus creates a high risk of engine damage.
Therefore, if the engine is often only run for short periods it is advisable
to change the engine oil at regular intervals or to let the engine run once
or twice a week for half an hour, so that it is not only operated in a cold
condition.
CAUTION
!
