Canon FAXPHONE B740 Manual Download | Manualshive

Page: 1 / 187

background image

ii

Preface

Copyright

This User’s Manual is copyrighted by Canon U.S.A., Inc. (“Canon”) with all rights
reserved. Under the copyright laws, this User’s Manual may not be reproduced in any
form, in whole or part, without prior written consent of Canon.

© 2001 Canon U.S.A., Inc.

Disclaimer

Canon has reviewed this User’s Manual thoroughly in order to make it an easy to use
manual for your Canon B740 system. All statements, technical information, and
recommendations in this manual and in any guides or related documents are believed
reliable, but the accuracy and completeness thereof are not guaranteed or warranted,
and they are not intended to be, nor should they be understood to be, representations
or warranties concerning the products described.

Your B740 copier/fax has been sold to you subject to the limited warranties set forth in
the warranty card. Further, Canon reserves the right to make changes in the
specifications of the products described in this manual at any time without notice and
without obligation to notify any person of such changes.

Trademarks

Canon and BJ are registered trademarks of Canon Inc. BCI, Bubble Jet and UHQ are
trademarks of Canon Inc.

All other product and brand names are registered trademarks, trademarks or service
marks of their respective owners.

As an

E

NERGY

S

TAR

®

Partner, Canon U.S.A., Inc. has

determined that this product meets the

E

NERGY

S

TAR

®

guidelines

for energy efficiency.

1
2
3
...
»

Summary of Contents for FAXPHONE B740




























































































































































































Reviews:

No comments

Related manuals for FAXPHONE B740

Brand: Toyota Pages: 39

Brand: Singer Pages: 24

Wertarbeit EU-7

Brand: W6 Pages: 83

Brand: Numatic Pages: 28

Brand: Pacific Pages: 8

Brand: Oki Pages: 137

Brand: Pfaff Pages: 130

Brand: Opus Pages: 16

Brand: American Games Pages: 16

Brand: Global Pages: 2

Brand: Brother Pages: 2

Brand: Brother Pages: 80

Brand: Brother Pages: 141

Brand: Brother Pages: 37

Brand: Brother Pages: 113

Brand: Brother Pages: 36

Brand: Brother Pages: 35

Brand: Brother Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands