manualshive.com logo in svg

Canon FAXPHONE B740, Manual

Share
Download
Canon FAXPHONE B740 Manual Download Page 18

Chapter 1

Introduction

1-7

Intr

oduction

– If the unit does not operate normally when you have followed the instructions in this

manual. Adjust only those controls that are covered by the operating instructions in
this manual. Improper adjustment of other controls may result in damage and may
require extensive work by a qualified technician to restore the product to normal
operation.

– If the unit has been dropped or the cabinet has been damaged.
– If the unit exhibits a distinct change in performance, indicating a need for servicing.

■

Location

• Place the unit on a flat, stable, vibration-free surface that is strong enough to support

its weight (approx. 11.2 lb./5.1 kg).

• Place the unit in a cool, dry, clean, well ventilated place.

– Make sure the area is free from dust.
– Make sure the location is not affected by extreme temperature changes, and always

stays between 50° and 90.5°F (10° and 32.5°C).

– Make sure the area’s relative humidity is always between 20% and 85%.

• Keep the unit away from direct sunlight as this can damage it. If you have to place it

near a window, install heavy curtains or blinds.

• Do not use the unit near water. Make sure that no wet or humid objects come into

contact with the unit.

• Do not use or store the unit outdoors.

• Do not install the unit near devices that contain magnets or generate magnetic fields,

such as speakers.

• If possible, place the unit near an existing telephone outlet to avoid the expense of

installing a new one.

• Place the unit near a standard 120 V AC power outlet. The socket outlet shall 

be installed near the equipment and shall be easily accessible.

• To ensure reliable operation of the unit and to protect it from overheating (which can

cause it to operate abnormally and create a fire risk), do not block the exhaust vent
and never block or cover any openings on the unit by placing it on a bed, sofa, rug, or
other similar surface. Do not place the unit in a closet or built-in installation, or near a
radiator or other heat register unless proper ventilation is provided. Install the unit
approximately 4 inches (10 cm) away from walls and other equipment.

• Do not stack boxes or furniture around the power outlet. Keep the area free so you

can reach the outlet quickly. If you notice anything unusual (smoke, strange odors,
noises) around the unit, unplug the unit immediately. Contact the Customer Care
Center.

• Do not allow anything to rest on the power cord, and do not place the unit where the

cord will be walked on. Make sure the cord is not knotted or kinked.

Summary of Contents for FAXPHONE B740




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands