manualshive.com logo in svg

Canon FAXPHONE B740, Manual

Share
Download
Canon FAXPHONE B740 Manual Download Page 19

1-8

Introduction

Chapter 1

■

Power Supply

• Plug the unit into a standard 120 V AC 60 Hz, three-prong grounded outlet. Only

operate the unit from the type of power source indicated on the unit’s label. If you are
not sure of the type of power available, consult your local power company.

• Use only the power cord that came with the unit. Using a longer cord or extension

cord can cause the unit to malfunction. If you must use an extension cord with the
unit, make sure that the total of the ampere ratings on the products plugged into the
extension cord does not exceed the extension cord ampere rating. Also, make sure
the total ampere rating of all products plugged into the wall outlet does not exceed the
current amperage of the circuit breaker.

• The unit is equipped with a three-prong, grounding-type plug provided with a third

(grounding) pin. This plug will only fit into a grounding-type outlet. This is a safety
feature. If you are unable to insert the plug into your outlet, contact an electrician to
replace your outlet. Do not defeat the safety purpose of the grounding-type plug by
breaking off the third prong or using a 3-to-2 adapter.

• Do not plug the unit into the same circuit as an appliance such as an air conditioner,

electric typewriter, television, or copier. Such devices generate electrical noise that
can interfere with your unit’s ability to send and receive faxes.

• During electrical storms, disconnect the power cord from the power outlet. (Please

note that any documents stored in the unit’s memory will be deleted when you unplug
the unit.)

• Unplug the unit only by pulling on the plug itself. Never pull on the cord.

• Whenever you unplug the unit, wait at least five seconds before you plug it in again.

• Check the plug frequently and make sure that it is firmly plugged into the socket.

c

This product emits low level magnetic flux.
If you use a cardiac pacemaker and feel abnormalities, please move away from this
product and consult your doctor.

Summary of Contents for FAXPHONE B740




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands