manualshive.com logo in svg

Canon FAXPHONE B740, Manual

Share
Download
Canon FAXPHONE B740 Manual Download Page 175

G-4

Glossary

Group dialing
A dialing method that enables you to dial up to 111 registered one-touch speed dialing
or coded speed dialing numbers together as a group. This means that you can press
just one or three buttons to enter numbers when sending the same document to many
destinations.

■

I

Ink Jet printer
A nonimpact printer that ejects ink onto paper to form characters. The copier/fax has a
special type of ink jet printer built in called a Bubble Jet printer.

ITU-T No. 1 Chart
A test chart, defined by ITU-TS, used to measure the transmission speed as well as the
transmitting and receiving memory capacity of a fax machine.

ITU-TS
International Telecommunications Union-Telecommunications Sector. A committee
created to set international standards for telecommunications.

■

J

Jack
The telephone receptacles on your wall and copier/fax used to connect the telephone
line, a telephone, and an extension phone, answering machine, or data modem.

■

M

Manual receiving
A method of receiving faxes in which you manually activate reception from the
copier/fax, or from an extension phone connected to the copier/fax.

Manual redialing
When you use regular dialing, you can redial a number “manually” by simply pressing
Redial/Pause. The last number dialed with the numeric buttons is the number redialed.

Memory broadcast
Allows you to send a scanned fax to as many as 113 destinations, using a combination
of one-touch speed dialing, coded speed dialing, and regular dialing.

Memory sending
Scans a document into memory before the copier/fax dials the number(s) and sends it.
This method allows you to retrieve your document immediately after scanning.

Modem
A device that converts (MOdulates) digital data for transmission over telephone lines. At
the receiving end, this device converts the modulated data (DEModulates) to digital
format that the PC understands.

Summary of Contents for FAXPHONE B740




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands