Westell Interchange iQ 2000, User Manual

Page: 3 / 112

UM380 03 010 iii
User Guide
Contents
Acknowledgements 2
Trademarks 2
Change History 2
Preface 1
Scope of this Guide 1
Management 1
Vision iQ 2
1 Introduction 3
1.1 InterChange iQ 2000 3
1.2 InterChange iQ 2000plus 4
1.3 Management with Vision iQ 4
1.4 Environment 5
1.4.1 External Dimensions and Weight 5
1.4.2 Power Requirement 5
1.5 Approvals and Safety 5
2 Hardware Installation Procedure 6
2.1 Introduction to Unit Installation 6
2.2 Unit Installation 6
2.2.1 Unpacking and Inspection 6
2.2.2 Hardware Installation 7
Back Panel Equipment 7
2.3 Power-On and Self-Test 9
2.3.1 Terminal Connections 9
2.3.2 Self-Test 9
2.4 Vision iQ Management Software Installation 10
2.5 InterChange iQ 2000 and 2000plus Installation 10
2.5.1 Set Factory Default Values 11
2.5.2 Set Time and Date 11
2.5.3 Protocol Configuration 12
2.5.4 Configuration using the Quick Start wizard 13
2.5.5 Configuration changes (for manual changes to the default settings) 13
2.6 Cabling into a Management System 14
2.6.1 Alarm Signal Cabling 14
2.6.2 Alarm Signal Cable Test 14
2.6.3 Management Terminal Cabling 14
2.6.4 Management Terminal Cable Connection Test 14
2.7 Network Cabling 15
2.7.1 Port Usage 15
2.7.2 Cabling Practice 15
2.7.3 Cabling Procedure 15