42
UM380 03 010
InterChange iQ 2000 and 2000plus
Figure 39: Quick Start System Screen 9.
On confirming the responses given, the InterChange iQ 2000 will display the configuration it
has determined. These will often be different to the responses given. To continue and store
this configuration type
CONF
. Alternatively type
RES
to restart the Quick Start system, or
UNDO
to back up to the last question asked.
On typing
CONF
, the system will take a few moments to file the new configuration into the
database before returning to the top-level menu prompt. If it determines that the Clock
Synchronisation Switch (on the rear of the unit) may be in the wrong position, a warning will
be given, as in Figure 40.
Figure 40: Quick Start System Screen 10.
At this prompt, either select
EXIT
to leave the configuration system and return to operational
mode, or you can set the console and protocol options (See
Section 2.5
for further details).
