UM380 03 010
5
Introduction
•
display diagnostic information which includes:
- impedance settings,
- Port Error, Major Alarm and call statistics,
•
Global polling of a list of remote InterChange iQ 2000 and iQ 2000plus units,
•
configure the InterChange iQ 2000 or iQ 2000plus unit, and
•
enable SNMP traps to up to 8 recipients.
New applications or updates are loaded into the InterChange iQ 2000 and iQ 2000plus unit’s
flash memory using the Download facility in Vision iQ.
1.4 Environment
Both InterChange iQ 2000 and iQ 2000plus units can be mounted in a cabinet or installed
free standing and should be sited to allow free movement of air for cooling purposes.
1.4.1 External Dimensions and Weight
Unpacked InterChange iQ 2000 and iQ 2000plus units are 275 mm wide x 217 mm deep x
50 mm high, and weigh 1.4 Kg. All diagnostic indicators are visible at the front and
all cable access is at the rear.
1.4.2 Power Requirement
The operating input voltage range is 100 - 240 VAC (50-60 Hz) with a power consumption
of maximum 10W.
The fuse and the On/Off switch (single pole) are accessible from the rear of unit
1.5 Approvals and Safety
The InterChange iQ 2000 and iQ 2000plus are approved for connection to
telecommunications systems, subject to conditions set out in this User Guide.
All users of the product must make themselves familiar with the Safety Information
contained in Appendix A.
Users must also be aware of the approvals information in Appendix A and, for use in the
U.K, comply with the statutory requirements for connection to a Public Network, also
outlined in Appendix A.
