36
UM380 03 010
InterChange iQ 2000 and 2000plus
Once the configuration has been loaded, the following screen will be displayed, regardless of
the method of connection. The menu header will display whether the unit is an InterChange
iQ 2000 or an iQ 2000plus.
Figure 28: Main Configuration Menu.
This is the main Configuration menu. When entering your choice, throughout the menu
system, type in the word at the start of the line (e.g.
TIME
) in upper case and then press
Return
. At any stage, typing ‘
?
’ will present the available options.
To configure the main aspects of the InterChange system, the user will need to run the Quick
Start protocol setup. Type
QUICK
to continue.
Figure 29: The Quick Start Protocol Setup Screen.
While in the Quick Start configuration system, the commands
UNDO
and
QUIT
can be used
to aid navigation.
UNDO
will always take you back to the immediately preceding question,
QUIT
will leave the Quick Start system without saving the responses made so far, and return
you to the Main Menu prompt.
