22
UM380 03 010
InterChange iQ 2000 and 2000plus
You are now ready to use Vision iQ to download application software to your InterChange iQ
2000 or iQ 2000plus unit and to manage its configuration.
4.6.3 Vision iQ Mode Options
The Mode menu contains two options:
Figure 7: Vision iQ Mode Options.
Switch to Configuration Mode
(
Figure 7
) which allows full configuration and monitoring
facilities. Configuration mode is normally password protected.
Switch to Monitor Mode
which allows access to a number of functions in read-only mode.
This is the default mode when Vision iQ is first installed.
Configuration Mode
Select
Switch to Configuration Mode
. You are asked to enter your password.
Figure 8: Password Dialogue Box.
You are strongly recommended to change your password immediately after installing Vision
iQ. If the password is lost the only way to regain access to Vision iQ configuration facilities, is
to re-install Vision iQ.
The configuration mode allows you to set up and access shelf definitions, do global polls and
access the configuration Wizard.
Monitor Mode
Monitor mode allows you monitor the status of the shelf but not to change any of the
configuration. There is no password protection of this mode.
The available monitoring options available to you are:
•
Connect - Disconnect and Reconnect.
•
Diagnostics - Overview, Major Alarms, Port Errors and Call Statistics.
