44
UM380 03 010
InterChange iQ 2000 and 2000plus
4.14.3 Q.932 Redirecting Number Information
The InterChange iQ 2000plus is configurable so that when DPNSS signals a diverting call,
the number information is returned to permit messages to be left in the original number voice
mail system mailbox.
Specifically, this facility can be used with Cisco Call Manager delivering Q.931 signalling to
the InterChange iQ 2000plus.
4.14.4 CCM Message Waiting Indication
Full integration of a Cisco Call Manager cluster into a DPNSS based VMS requires a signal
that calls are waiting to the CCM controlled telephones.
The numbers that are configured in the CCM Configure Services Parameters must also be
configured into the InterChange iQ 2000plus using the CCM options in the
CUST
om menu
via
QUICK
start in the Vision iQ management application.
4.14.5 Configuration Wizard Variation
If an InterChange iQ 2000plus unit is attached to a Cisco Call Manager, an Avaya Definity or
a Nortel Networks Meridian PBX and you select
CUST
in the Vision iQ
QUICK
start menu,
the following screen will be presented.
Figure 41: The Quick Start System CUST menu for an InterChange iQ 2000plus.
The addition of
M1
in the menu allows configuration parameters for the Nortel Networks
Meridian to be entered before proceeding to the
VOIP
options.
All
CUST
sub menu variations for the InterChange iQ 2000plus accommodate configuration
of the Proxy Diversion, Number Redirection and Message Waiting features described above.
