UM380 03 010
91
Approvals, Safety Instructions and Statutory Information
A Approvals, Safety Instructions and
Statutory Information
This information must be read prior to use of this equipment and overrides as appropriate
any information in respect of connection and use of the equipment.
Address any enquiries regarding regulatory aspects of this equipment to Avaya.
Connection to Mains Voltage Supply
The wires in the mains lead are coloured in accordance with the following code. As the
colours of the wire in the mains lead may not correspond with the coloured markings in the
plug, proceed as follows:
•
The wire coloured GREEN and YELLOW must be connected to the terminal
marked E or by the earth symbol or coloured GREEN, or GREEN and YELLOW.
•
The wire coloured BLUE must be connected to the terminal marked N or coloured
BLACK or BLUE.
•
The wire coloured BROWN must be connected to the terminal marked L or
coloured RED or BROWN.
Replacing the mains fuse
Warning:
For continued protection against the risk of fire and shock hazard, replace fuses only
with the same type and rating.
Fuse type: T2A H 250V.
Product Servicing
This product contains no user-serviceable parts. Any attempt by non-qualified personnel to
gain access inside the product enclosure will compromise the terms of the approval quoted
above. Should such access be attempted, liability will not be accepted if the equipment is
shown subsequently not to be in compliance with the terms of approval.
Warning:
This equipment must only be installed and maintained by qualified service personnel.
