10
UM380 03 010
InterChange iQ 2000 and iQ 2000plus
2.4 Vision iQ Management Software Installation
Note:
Windows
®
NT users must have administrator user rights to install Vision iQ.
Follow this procedure to install Vision iQ:
1 Start Windows
®
on the PC and insert the CD-ROM in the reader.
The CD-ROM will automatically launch a main menu on the screen.
2 Choose
Install Vision iQ
from the list.
The install wizard will appear and enable Vision iQ to be installed to the hard disk
of the PC. Once installed, an icon will be placed on the Windows
®
desktop and
Vision iQ placed in the Windows
®
desktop Startup Program option.
Note:
The Vision iQ password is reset to its default state by the installation process. The default
password is:
Vision
and is case sensitive.
2.5 InterChange iQ 2000 and 2000plus Installation
This procedure installs the initial configuration for the unit and checks that the operational
software is operating correctly.
On completion of the self-test the Loader Module is invoked. It consists of:
• an Application Flash Check module, and
• a Download module.
The Application Flash Check module checks the Application Flash for the presence of a
Protocol Application Module.
If a Protocol Application Module is present in the Application Flash it is copied into DRAM
and executed.
If a Protocol Application Module is not present, the Download module is copied into DRAM and
executed. The protocol application software must then be downloaded before proceeding.
The Protocol Application Module consists of:
•
A Configuration module
•
An Operation module comprising:
- A Protocol module
- An Online Management module
